Messages

Alright, I'm going to bump this thread again.

Now I want to start playing SCCT again - but yet, once again - this is a REALLY REALLY annoying problem...
Since I last time I've reformatted my PC - so, all new drivers and such. So that was not the problem as I still got the exact same problem.

I also tried an optical mouse, on 2 different surfaces - same problem here. So I don't think there's a DPI problem as it's the same problem with both laser and optical..

One thing I just thought of quickly - I'm playing with resolution 1600x1200, but that's not widescreen and I have widescreen..?

Tried this too:
http://www.esreality.com/?a=post&id=1846538

Did not work.

its not ur dpi , its ur polling rate as mentioned on the last page before this, you need to set it at 125 hz.

HIDUSBF

http://www.overclock.net/t/596276/changing-usb-polling-rate-to-1000hz-or-lower

I downloaded this.
And I did everything according to the guide.

Changed the polling rate to 125 (though I've read 125 is standard?)
Though it's 125 when I move my mouse fast it peaks at 1030 Hz????
And when I move my mouse really slow the average goes from like average 1000 Hz and 1 ms response time too 50-100 Hz and 2-80 ms?

Can anyone give this a serious thought?
I really want to play, but this problem is way to annoying. I can't aim.... If I do small movements - they're big ingame too.. Like jumpy.

I could record and you'll see...

Alright, I'm going to bump this thread again.

Now I want to start playing SCCT again - but yet, once again - this is a REALLY REALLY annoying problem...
Since I last time I've reformatted my PC - so, all new drivers and such. So that was not the problem as I still got the exact same problem.

I also tried an optical mouse, on 2 different surfaces - same problem here. So I don't think there's a DPI problem as it's the same problem with both laser and optical..

One thing I just thought of quickly - I'm playing with resolution 1600x1200, but that's not widescreen and I have widescreen..?

Tried this too:
http://www.esreality.com/?a=post&id=1846538

Did not work.

Yeah you are right. sorry.

Where you come from?

I've just played with a guy named xxxSunshinexxx before and we really enjoyed.

Anyway the max amount of players that i've seen online is of 35/40 (world).
Now there are 9/10 players online (world).

Wow, really? I remember when I was as most active, there were about 200-300 players normally, that was good times... :(
And AgentX, THANKS! Hopefully I can enjoy some games soon :)

And no, i'm not xxxSunshinexxx, I'm going under the name of "S.a.S-Sunshine"

Well, it's not piracy. As to access online gameplay - you have to enter your bought CD-key =)

So, without a bought cd-key you can't do nothing with the versusfolder :)

Btw, hey you all! It's been a long time. Too bad PS ain't progressing much anymore..

However, I got one problem - My SCCT CD is kinda broken. So if anyone could upload the "Versus" folder so I could play it - it would be great!
It will work, I remember the polish user "Jacob" did this for me way back, and it worked great. But now I'm up for some great SCCT gaming!

Or is anyone even playing that anymore? Is it possible to find games?

Hmm, I can't get the disable driver thingy to work.

I installed it, put "Test mode" restarting computer, but I don't have watermark in the corner = it doesn't work.

Hz = frequency of time between polls. You want this to be high for most precision. Can get sluggish if you go too high.
DPI = dots per inch. Defines the precision. Preferably high, but depends on your preferences (do you want to move the mouse a lot, or little etc)

Oh okay, so 1000Hz might be to high? Can you tell me a good hertz changing program then?

both logitech and razer have their own customizable program that comes on the cd / drivers.

For CT when I do play, my dpi is 800 and of course 125 hz for the polling rate for smooth operation.

I got the brand "Ace" so I need some other program, as they don't have such drivers =)

Hz = frequency of time between polls. You want this to be high for most precision. Can get sluggish if you go too high.
DPI = dots per inch. Defines the precision. Preferably high, but depends on your preferences (do you want to move the mouse a lot, or little etc)

Oh okay, so 1000Hz might be to high? Can you tell me a good hertz changing program then?

Tested stuff out yesterday since I had the game installed. I have a G500 Logitech mouse, so I set the polling rate between 500Hz - which is the standard for it - and 125Hz. The mouse didn't get any jagged movement or anything, but it was painfully slow at the same 8 sensitivity that I like to use at 125Hz.

Also I remember having some problems with my mouse before, went to default.ini in the system folder, and edited the line "ReduceMouseLag=True" to False, and it fixed it all, but I'm not exactly sure what the problem was, I know it was making the game pretty unplayable.

okay, I'm gonna try this.
And btw, the one who posted about my last topic about this problem - if I remember right, I never fixed the problem - hence I didn't start playing again.

edit: I already had "ReduceMouseLag=False" :(
edit2: is hz same as DPI?

Googled some HZ changer and changed it to 500, but it stays at 1000Hz?

I had this problem last time I played too, and don't think I managed to solve it. However, I was gonna play CT today and got reminded of the problem.
Here's a describing piture:
http://bildr.no/view/997276

I move the mouse in a straight line, but aim is REALLY curvy. Impossible to aim. Though when I got sniper up, it's like it should...
Anyone got a clue or had the same problem?

Got Windows7 as operating system, if it makes any difference. And only CT give me this problem.

no it doesnt, just set your interpolling rate  to 125 hz prob solved.

How?

I had this problem last time I played too, and don't think I managed to solve it. However, I was gonna play CT today and got reminded of the problem.
Here's a describing piture:
http://bildr.no/view/997276

I move the mouse in a straight line, but aim is REALLY curvy. Impossible to aim. Though when I got sniper up, it's like it should...
Anyone got a clue or had the same problem?

Got Windows7 as operating system, if it makes any difference. And only CT give me this problem.

I have a question:
How's everything going with PS? I don't see any updates since a very long time.

Oh, I thought you were being ironic and that my idea was so stupid so you were just like "bah" :)

I tried downloading but it forces me to sign up AND to do that - I need to type in my creditcard -which I definetly won't, as I don't really know how secure they really are.

If someone got an account and can let me borrow it / download and send me the file(s) it would be great... :)